Thursday, October 6, 2011

Lens Assembly Spacer Again!

After some extensive search, I found some M2.5 standoffs. I bought 15mm, 20mm and 25mm. I used the 15mm long ones.




I used the original bolts on top to hold the lens assembly to housing securely. I left the ring on the lens and slid it down so it is blocking any light passing though the gap.




The results speak for themselves:




Perfectly square and stable image. It is not moving or shaking every time I bump the table.



That last one is of the focused projector.

1 comment:

  1. If you want to use the ND filter sharpening....nd filter 2x-1 existing ones in different scale....heheheh :) goodluck

    ReplyDelete