The aluminium (or aluminum)extrusions and the service from Bosch - Rexroth proved no less than pure perfection! I have received the extrusions cut to size within 0.1mm or better and packaged well. I have received exactly what I ordered, on time (was quoted 3 workdays) in 2 workdays. There were no missing parts, wrong parts or defective parts. Yes, a little expensive, but all worth it when comparing the prospects of finding a welder, cutting, machining, priming, painting, wrong sizes, redo's etc.
Plastic End caps and Corner Brackets(gussets).
Whoaa! Shiny stuff! Put on your sunglasses before clicking!
BOM of the extrusions:
#1(one pictured) 9pcs. of 420мм – Extrusion 40х40 L – for the frame and one for the projector
#2,#3,#4,#5 4pcs. of 400мм – Extrusion 40х40 L – for the corners
#6 1pcs. of 320мм – Extrusion 40х40 L – for the VAT crossmember
#7 1pcs. of 305мм – Extrusion 40х40 L – for the Z axis THK KR20
#8,#9 2pcs. of 160мм – Extrusion 40х40 L – for the projector X movement
#10 1pcs. of 105мм – Extrusion 40х40 L – for the VAT tilt LS3-1 mount